Merge pull request 'patch-1' (#1) from patch-1 into main

Reviewed-on: http://192.168.1.133:3002/DocRock3r/Deej_Mixer/pulls/1

config.yaml

@@ -0,0 +1,27 @@
+# process names are case-insensitive
+# you can use 'master' to indicate the master channel, or a list of process names to create a group
+# you can use 'mic' to control your mic input level (uses the default recording device)
+# you can use 'deej.unmapped' to control all apps that aren't bound to any slider (this ignores master, system, mic and device-targeting sessions)
+# windows only - you can use 'deej.current' to control the currently active app (whether full-screen or not)
+# windows only - you can use a device's full name, i.e. "Speakers (Realtek High Definition Audio)", to bind it. this works for both output and input devices
+# windows only - you can use 'system' to control the "system sounds" volume
+# important: slider indexes start at 0, regardless of which analog pins you're using!
+slider_mapping:
+  0: master
+  1: chrome.exe
+  2: spotify.exe
+  3:
+    - pathofexile_x64.exe
+    - rocketleague.exe
+  4: discord.exe
+
+# set this to true if you want the controls inverted (i.e. top is 0%, bottom is 100%)
+invert_sliders: false
+
+# settings for connecting to the arduino board
+com_port: COM4
+baud_rate: 9600
+
+# adjust the amount of signal noise reduction depending on your hardware quality
+# supported values are "low" (excellent hardware), "default" (regular hardware) or "high" (bad, noisy hardware)
+noise_reduction: default

deej-5-sliders-vanilla.ino

@@ -0,0 +1,52 @@
+const int NUM_SLIDERS = 5;
+const int analogInputs[NUM_SLIDERS] = {A0, A1, A2, A3, A4};
+
+int analogSliderValues[NUM_SLIDERS];
+
+void setup() { 
+  for (int i = 0; i < NUM_SLIDERS; i++) {
+    pinMode(analogInputs[i], INPUT);
+  }
+
+  Serial.begin(9600);
+}
+
+void loop() {
+  updateSliderValues();
+  sendSliderValues(); // Actually send data (all the time)
+  // printSliderValues(); // For debug
+  delay(10);
+}
+
+void updateSliderValues() {
+  for (int i = 0; i < NUM_SLIDERS; i++) {
+     analogSliderValues[i] = analogRead(analogInputs[i]);
+  }
+}
+
+void sendSliderValues() {
+  String builtString = String("");
+
+  for (int i = 0; i < NUM_SLIDERS; i++) {
+    builtString += String((int)analogSliderValues[i]);
+
+    if (i < NUM_SLIDERS - 1) {
+      builtString += String("|");
+    }
+  }
+  
+  Serial.println(builtString);
+}
+
+void printSliderValues() {
+  for (int i = 0; i < NUM_SLIDERS; i++) {
+    String printedString = String("Slider #") + String(i + 1) + String(": ") + String(analogSliderValues[i]) + String(" mV");
+    Serial.write(printedString.c_str());
+
+    if (i < NUM_SLIDERS - 1) {
+      Serial.write(" | ");
+    } else {
+      Serial.write("\n");
+    }
+  }
+}