From fd9cb9bde634afe20ae2e42171f2d13870627633 Mon Sep 17 00:00:00 2001
From: DocRock3r <docrock3r@noreply.localhost>
Date: Sat, 11 Jan 2025 19:29:03 +0000
Subject: [PATCH] Update config.yaml

---
 config.yaml | 52 +++++++++++++++++++++++++++-------------------------
 1 file changed, 27 insertions(+), 25 deletions(-)

diff --git a/config.yaml b/config.yaml
index c4c52f1..2c6b858 100644
--- a/config.yaml
+++ b/config.yaml
@@ -1,25 +1,27 @@
-# process names are case-insensitive
-# you can use 'master' to indicate the master channel, or a list of process names to create a group
-# you can use 'mic' to control your mic input level (uses the default recording device)
-# you can use 'deej.unmapped' to control all apps that aren't bound to any slider (this ignores master, system, mic and device-targeting sessions) (experimental)
-# windows only - you can use 'deej.current' to control the currently active app (whether full-screen or not) (experimental)
-# windows only - you can use a device's full name, i.e. "Speakers (Realtek High Definition Audio)", to bind it. this works for both output and input devices
-# windows only - you can use 'system' to control the "system sounds" volume
-# important: slider indexes start at 0, regardless of which analog pins you're using!
-slider_mapping:
-  0: spotify.exe
-  1: 
-  2: 
-  3: 
-  4: 
-
-# set this to true if you want the controls inverted (i.e. top is 0%, bottom is 100%)
-invert_sliders: false
-
-# settings for connecting to the arduino board
-com_port: COM7
-baud_rate: 9600
-
-# adjust the amount of signal noise reduction depending on your hardware quality
-# supported values are "low" (excellent hardware), "default" (regular hardware) or "high" (bad, noisy hardware)
-noise_reduction: high
+# process names are case-insensitive
+# you can use 'master' to indicate the master channel, or a list of process names to create a group
+# you can use 'mic' to control your mic input level (uses the default recording device)
+# you can use 'deej.unmapped' to control all apps that aren't bound to any slider (this ignores master, system, mic and device-targeting sessions)
+# windows only - you can use 'deej.current' to control the currently active app (whether full-screen or not)
+# windows only - you can use a device's full name, i.e. "Speakers (Realtek High Definition Audio)", to bind it. this works for both output and input devices
+# windows only - you can use 'system' to control the "system sounds" volume
+# important: slider indexes start at 0, regardless of which analog pins you're using!
+slider_mapping:
+  0: master
+  1: chrome.exe
+  2: spotify.exe
+  3:
+    - pathofexile_x64.exe
+    - rocketleague.exe
+  4: discord.exe
+
+# set this to true if you want the controls inverted (i.e. top is 0%, bottom is 100%)
+invert_sliders: false
+
+# settings for connecting to the arduino board
+com_port: COM4
+baud_rate: 9600
+
+# adjust the amount of signal noise reduction depending on your hardware quality
+# supported values are "low" (excellent hardware), "default" (regular hardware) or "high" (bad, noisy hardware)
+noise_reduction: default
\ No newline at end of file