bump to release 0.14.2

README.md

@@ -163,7 +163,7 @@ I grouped most of the variables you may want to modify in this section ([see Doc
 Obviously you can also build your own firmware. To build the *standard* one I used:
 
 - Arduino IDE `2.2.1`
-- `Adafruit TinyUSB Library` version `2.2.6`, `Pico-PIO-USB` version `0.5.2`, Board `Raspberry Pi RP2040 (3.6.0)` setting Tools=>CPU Speed at `120MHz` and Tools=>USB Stack to `Adafruit TinyUSB`
+- `Adafruit TinyUSB Library` version `2.2.7`, `Pico-PIO-USB` version `0.5.2`, Board `Raspberry Pi RP2040 (3.6.2)` setting Tools=>CPU Speed at `120MHz` and Tools=>USB Stack to `Adafruit TinyUSB`
 - `ssd1306` OLED library version `1.8.3`
 
 If you want to re-create a new fake filesystem, you may want to have a look to the `utils` folder, where I placed some utilities to build a new one.

USBvalve/USBvalve.ino

@@ -44,7 +44,7 @@ Adafruit_USBH_Host USBHost;
 // Define vars for OLED screen
 #define I2C_ADDRESS 0x3C  // 0X3C+SA0 - 0x3C or 0x3D
 #define RST_PIN -1        // Define proper RST_PIN if required.
-#define OLED_HEIGHT 32    // 64 or 32 depending on the OLED
+#define OLED_HEIGHT 64    // 64 or 32 depending on the OLED
 #define OLED_LINES (OLED_HEIGHT / 8)
 SSD1306AsciiWire oled;
 
@@ -75,7 +75,7 @@ bool activeState = false;
 //
 // USBvalve globals
 //
-#define VERSION "USBvalve - 0.14.1"
+#define VERSION "USBvalve - 0.14.2"
 boolean readme = false;
 boolean autorun = false;
 boolean written = false;