1.0.1

README.md

@@ -83,7 +83,7 @@ The polling of BOOTSEL was creating some issues to the *BADUSB* detection so thi
 
 <img src="https://github.com/cecio/USBvalve/blob/main/pictures/reset_button.jpg" width="35%" height="35%" />
 
-~~In `PCB` you'll find also a version `1.3` of the board, with some holes on pads 1 and 3 to facilitate the mount of the button. But as you can see, you can also use your old version~~. (still waiting the new printed PCB to test it before publishing)
+In `PCB` you'll find also a version `1.3` of the board, with some holes on pads 1 and 3 to facilitate the mount of the button. But as you can see, you can also use your old version.
 
 If you are not using the *BADUSB* functions or if you prefer to have less coverage on detection but keep BOOTSEL usage, I'm also providing a firmware created with *bootsel* enabled (see folder and releases).
 
@@ -199,16 +199,13 @@ I grouped most of the variables you may want to modify in this section of `usb_c
 //
 // You can see here for inspiration: https://the-sz.com/products/usbid/
 //
-// Example:
+#define USB_VENDORID       0xCAFE
-//             0x0951 0x16D5    VENDORID_STR: Kingston   PRODUCTID_STR: DataTraveler
+#define USB_PRODUCTID      0x1337
-//
+#define USB_DESCRIPTOR     "DataStore"
-#define USB_VENDORID       0x0951
+#define USB_MANUF          "USB Acme"
-#define USB_PRODUCTID      0x16D5
-#define USB_DESCRIPTOR     "DataTraveler"
-#define USB_MANUF          "Kingston"
 #define USB_SERIAL         "123456789A"
-#define USB_VENDORID_STR   "Kingston"        // Up to 8 chars
+#define USB_VENDORID_STR   "Acme"            // Up to 8 chars
-#define USB_PRODUCTID_STR  "DataTraveler"    // Up to 16 chars
+#define USB_PRODUCTID_STR  "DataStore"       // Up to 16 chars
 #define USB_VERSION_STR    "1.0"             // Up to 4 chars
 ```
 

src/usb_config.h

@@ -2,7 +2,7 @@
 #define USB_CONFIG_H
 
 // Project version
-#define VERSION "USBvalve - 1.0.0"
+#define VERSION "USBvalve - 1.0.1"
 
 // USB anti-detection settings
 //
@@ -12,16 +12,13 @@
 //
 // You can see here for inspiration: https://the-sz.com/products/usbid/
 //
-// Example:
+#define USB_VENDORID       0xCAFE
-//             0x0951 0x16D5    VENDORID_STR: Kingston   PRODUCTID_STR: DataTraveler
+#define USB_PRODUCTID      0x1337
-//
+#define USB_DESCRIPTOR     "DataStore"
-#define USB_VENDORID       0x0951
+#define USB_MANUF          "USB Acme"
-#define USB_PRODUCTID      0x16D5
-#define USB_DESCRIPTOR     "DataTraveler"
-#define USB_MANUF          "Kingston"
 #define USB_SERIAL         "123456789A"
-#define USB_VENDORID_STR   "Kingston"        // Up to 8 chars
+#define USB_VENDORID_STR   "Acme"            // Up to 8 chars
-#define USB_PRODUCTID_STR  "DataTraveler"    // Up to 16 chars
+#define USB_PRODUCTID_STR  "DataStore"       // Up to 16 chars
 #define USB_VERSION_STR    "1.0"             // Up to 4 chars
 
 // Disk configuration

src/usb_device.c

@@ -73,14 +73,17 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset,
         flag_autorun = true;
     }
 
-    // Protect memory: only read from real disk blocks
+    // Return data from ramdisk, or zeros for blocks beyond it.
-    if (lba < DISK_BLOCK_NUM - 1) {
+    // The disk reports FAKE_DISK_BLOCK_NUM sectors but only
-        uint8_t const* addr = msc_disk[lba];
+    // DISK_BLOCK_NUM exist in RAM, the rest must read as empty.
-        memcpy(buffer, addr, bufsize);
+    if (lba < DISK_BLOCK_NUM) {
+        memcpy(buffer, msc_disk[lba], bufsize);
+    } else {
+        memset(buffer, 0, bufsize);
     }
 
     serial_printf("Read LBA: %u   Size: %u\r\n", (unsigned)lba, (unsigned)bufsize);
-    if (lba < DISK_BLOCK_NUM - 1) {
+    if (lba < DISK_BLOCK_NUM) {
         hex_dump(msc_disk[lba], MAX_DUMP_BYTES);
     }
 
@@ -105,14 +108,13 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset,
         flag_written = true;
     }
 
-    // Protect memory: only write to real disk blocks
+    // Only write to real disk blocks; silently discard beyond ramdisk
-    if (lba < DISK_BLOCK_NUM - 1) {
+    if (lba < DISK_BLOCK_NUM) {
-        uint8_t* addr = msc_disk[lba];
+        memcpy(msc_disk[lba], buffer, bufsize);
-        memcpy(addr, buffer, bufsize);
     }
 
     serial_printf("Write LBA: %u   Size: %u\r\n", (unsigned)lba, (unsigned)bufsize);
-    if (lba < DISK_BLOCK_NUM - 1) {
+    if (lba < DISK_BLOCK_NUM) {
         hex_dump(msc_disk[lba], MAX_DUMP_BYTES);
     }