Pico2 support (#299)

* Add support for Pico2/2W boards

* Update documentation to include Pico2/2W

* update language support

README.md

@@ -27,11 +27,19 @@ Install and have your USB Rubber Ducky working in less than 5 minutes.
 
 If using a Pico board:
 
-Copy the adafruit-circuitpython-raspberry_pi_pico-en_US-8.0.0.uf2 file to the root of the Pico (RPI-RP2). The device will reboot and after a second or so, it will reconnect as CIRCUITPY.
+Copy the adafruit-circuitpython-raspberry_pi_pico-en_US-9.2.1.uf2 file to the root of the Pico (RPI-RP2). The device will reboot and after a second or so, it will reconnect as CIRCUITPY.
 
 If using a Pico W board:
 
-Copy the adafruit-circuitpython-raspberry_pi_pico_w-en_US-8.0.0.uf2 file to the root of the Pico (RPI-RP2). The device will reboot and after a second or so, it will reconnect as CIRCUITPY.
+Copy the adafruit-circuitpython-raspberry_pi_pico_w-en_US-9.2.1.uf2 file to the root of the Pico (RPI-RP2). The device will reboot and after a second or so, it will reconnect as CIRCUITPY.  
+
+If using a Pico 2 board:
+
+Copy the adafruit-circuitpython-raspberry_pi_pico2-en_US-9.2.1.uf2 file to the root of the Pico (RPI-RP2). The device will reboot and after a second or so, it will reconnect as CIRCUITPY.
+
+If using a Pico 2W board:
+
+Copy the adafruit-circuitpython-raspberry_pi_pico2_w-en_US-9.2.1.uf2 file to the root of the Pico (RPI-RP2). The device will reboot and after a second or so, it will reconnect as CIRCUITPY.
 
 4. Copy the lib folder to the root of the CIRCUITPY
 
@@ -76,14 +84,16 @@ Install and have your USB Rubber Ducky working in less than 5 minutes.
 
 1. Clone the repo to get a local copy of the files. `git clone https://github.com/dbisu/pico-ducky.git`
 
-2. Download [CircuitPython for the Raspberry Pi Pico](https://circuitpython.org/board/raspberry_pi_pico/). *Updated to 8.0.0  
-   Download [CircuitPython for the Raspberry Pi Pico W](https://circuitpython.org/board/raspberry_pi_pico_w/). *Updated to 8.0.0
+2. Download [CircuitPython for the Raspberry Pi Pico](https://circuitpython.org/board/raspberry_pi_pico/). *Updated to 9.2.1  
+   Download [CircuitPython for the Raspberry Pi Pico W](https://circuitpython.org/board/raspberry_pi_pico_w/). *Updated to 9.2.1
+   Download [CircuitPython for the Raspberry Pi Pico 2](https://circuitpython.org/board/raspberry_pi_pico2/). *Updated to 9.2.1  
+   Download [CircuitPython for the Raspberry Pi Pico 2W](https://circuitpython.org/board/raspberry_pi_pico2_w/). *Updated to 9.2.1
 
 3. Plug the device into a USB port while holding the boot button. It will show up as a removable media device named `RPI-RP2`.
 
 4. Copy the downloaded `.uf2` file to the root of the Pico (`RPI-RP2`). The device will reboot and after a second or so, it will reconnect as `CIRCUITPY`.
 
-5. Download `adafruit-circuitpython-bundle-8.x-mpy-YYYYMMDD.zip` [here](https://github.com/adafruit/Adafruit_CircuitPython_Bundle/releases/latest) and extract it outside the device.
+5. Download `adafruit-circuitpython-bundle-9.x-mpy-YYYYMMDD.zip` [here](https://github.com/adafruit/Adafruit_CircuitPython_Bundle/releases/latest) and extract it outside the device.
 
 6. Navigate to `lib` in the recently extracted folder and copy `adafruit_hid` to the `lib` folder on your Raspberry Pi Pico.
 
@@ -100,7 +110,7 @@ Install and have your USB Rubber Ducky working in less than 5 minutes.
 12. *For Pico W Only* Create the file `secrets.py` in the root of the Pico W. This contains the AP name and password to be created by the Pico W.  
 `secrets = { 'ssid' : "BadAPName", 'password' : "badpassword" }`
 
-13. Find a script [here](https://github.com/hak5/usbrubberducky-payloads) or [create your own one using Ducky Script](https://docs.hak5.org/hak5-usb-rubber-ducky/ducky-script-basics/hello-world) and save it as `payload.dd` in the Pico. Currently, pico-ducky only supports DuckyScript 1.0, not 3.0.
+13. Find a script [here](https://github.com/hak5/usbrubberducky-payloads) or [create your own one using Ducky Script](https://docs.hak5.org/hak5-usb-rubber-ducky/ducky-script-basics/hello-world) and save it as `payload.dd` in the Pico. Currently, pico-ducky only supports DuckyScript 1.0, and some of 3.0.
 
 14. Be careful, if your device isn't in [setup mode](#setup-mode), the device will reboot and after half a second, the script will run.
 

boot.py

@@ -24,10 +24,10 @@ noStorageStatus = noStoragePin.value
 #   GP15 not connected == USB NOT visible
 #   GP15 connected to GND == USB visible
 
-if(board.board_id == 'raspberry_pi_pico'):
+if(board.board_id == 'raspberry_pi_pico' or board.board_id == 'raspberry_pi_pico2'):
     # On Pi Pico, default to USB visible
     noStorage = not noStorageStatus
-elif(board.board_id == 'raspberry_pi_pico_w'):
+elif(board.board_id == 'raspberry_pi_pico_w' or board.board_id == 'raspberry_pi_pico2_w'):
     # on Pi Pico W, default to USB hidden by default
     # so webapp can access storage
     noStorage = noStorageStatus

build_scripts/create_release_bundle.py

@@ -17,7 +17,8 @@ languages = [ "MAC_FR",
               "WIN_IT",
               "WIN_PO",
               "WIN_SW",
-              "WIN_TR" ]
+              "WIN_TR",
+              "WIN_UK" ]
 
 supported_boards = ["raspberry_pi_pico",
                     "raspberry_pi_pico_w",

code.py

@@ -12,7 +12,7 @@ import digitalio
 from board import *
 import board
 from duckyinpython import *
-if(board.board_id == 'raspberry_pi_pico_w'):
+if(board.board_id == 'raspberry_pi_pico_w' or board.board_id == 'raspberry_pi_pico2_w'):
     import wifi
     from webapp import *
 
@@ -41,9 +41,9 @@ def startWiFi():
 #supervisor.disable_autoreload()
 supervisor.runtime.autoreload = False
 
-if(board.board_id == 'raspberry_pi_pico'):
+if(board.board_id == 'raspberry_pi_pico' or board.board_id == 'raspberry_pi_pico2'):
     led = pwmio.PWMOut(board.LED, frequency=5000, duty_cycle=0)
-elif(board.board_id == 'raspberry_pi_pico_w'):
+elif(board.board_id == 'raspberry_pi_pico_w' or board.board_id == 'raspberry_pi_pico2_w'):
     led = digitalio.DigitalInOut(board.LED)
     led.switch_to_output()
 
@@ -68,7 +68,7 @@ async def main_loop():
     global led,button1
 
     button_task = asyncio.create_task(monitor_buttons(button1))
-    if(board.board_id == 'raspberry_pi_pico_w'):
+    if(board.board_id == 'raspberry_pi_pico_w' or board.board_id == 'raspberry_pi_pico2_w'):
         pico_led_task = asyncio.create_task(blink_pico_w_led(led))
         print("Starting Wifi")
         startWiFi()

duckyinpython.py

@@ -249,9 +249,9 @@ def selectPayload():
 
 async def blink_led(led):
     print("Blink")
-    if(board.board_id == 'raspberry_pi_pico'):
+    if(board.board_id == 'raspberry_pi_pico' or board.board_id == 'raspberry_pi_pico2'):
         blink_pico_led(led)
-    elif(board.board_id == 'raspberry_pi_pico_w'):
+    elif(board.board_id == 'raspberry_pi_pico_w' or board.board_id == 'raspberry_pi_pico2_w'):
         blink_pico_w_led(led)
 
 async def blink_pico_led(led):