From f79fe2cb48efdd4d00a157bb4b9ca681ced16280 Mon Sep 17 00:00:00 2001 From: mm12 Date: Sun, 27 Mar 2022 13:27:58 -0500 Subject: [PATCH] Update README.md (#65) --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 8413a0c..5f4fa05 100644 --- a/README.md +++ b/README.md @@ -50,7 +50,7 @@ Enter setup mode. Copy boot.py to the root of the pico-ducky. Copy your payload script to the pico-ducky. Disconnect the pico from your host PC. -Connect a jumper wire between pin 18 and pin 20. +Connect a jumper wire between pin 18 (GND) and pin 20 (GPIO15). This will prevent the pico-ducky from showing up as a USB drive when plugged into the target computer. Remove the jumper and reconnect to your PC to reprogram. The default mode is USB mass storage enabled.