Added USB enable-disable mode (#25)

README.md

@@ -20,13 +20,13 @@
 
 Install and have your USB Rubber Ducky working in less than 5 minutes.
 
-1. Download [CircuitPython for the Raspberry Pi Pico](https://circuitpython.org/board/raspberry_pi_pico/).
+1. Download [CircuitPython for the Raspberry Pi Pico](https://circuitpython.org/board/raspberry_pi_pico/). *Updated to 7.0.0
 
 2. Plug the device into a USB port. It will show up as a removable media device named `RPI-RP2`.
 
 3. Copy the downloaded `.uf2` file to the root of the Pico (`RPI-RP2`). The device will reboot and after a second or so, it will reconnect as `CIRCUITPY`.
 
-4. Download `adafruit-circuitpython-bundle-6.x-mpy-YYYYMMDD.zip` [here](https://github.com/adafruit/Adafruit_CircuitPython_Bundle/releases/latest) and extract it outside the device.
+4. Download `adafruit-circuitpython-bundle-7.x-mpy-YYYYMMDD.zip` [here](https://github.com/adafruit/Adafruit_CircuitPython_Bundle/releases/latest) and extract it outside the device.
 
 5. Navigate to `lib` in the recently extracted folder and copy `adafruit_hid` to the `lib` folder in your Raspberry Pi Pico.
 
@@ -34,7 +34,7 @@ Install and have your USB Rubber Ducky working in less than 5 minutes.
 
 7. Find a script [here](https://github.com/hak5darren/USB-Rubber-Ducky/wiki/Payloads) or [create your own one using Ducky Script](https://github.com/hak5darren/USB-Rubber-Ducky/wiki/Duckyscript) and save it as `payload.dd` in the Pico.
 
-8. Be careful, if your device isn't in [setup mode](#setup-mode), the device will reboot and after half a second, the script will run. 
+8. Be careful, if your device isn't in [setup mode](#setup-mode), the device will reboot and after half a second, the script will run.
 
 ### Setup mode
 
@@ -43,9 +43,23 @@ The easiest way to so is by using a jumper wire between those pins as seen bello
 
 ![Setup mode with a jumper](images/setup-mode.png)
 
+### USB enable/disable mode
+
+If you need the pico-ducky to not show up as a USB mass storage device for stealth, follow these instructions.  
+Enter setup mode.  
+Copy boot.py to the root of the pico-ducky.  
+Copy your payload script to the pico-ducky.  
+Disconnect the pico from your host PC.
+Connect a jumper wire between pin 18 and pin 20.
+This will prevent the pico-ducky from showing up as a USB drive when plugged into the target computer.  
+Remove the jumper and reconnect to your PC to reprogram.
+The default mode is USB mass storage enabled.   
+
+![USB enable/disable mode](images/usb-boot-mode.png)
+
 ## Useful links and resources
 
-### Docs 
+### Docs
 
 [CircuitPython](https://circuitpython.readthedocs.io/en/6.3.x/README.html)
 
@@ -59,4 +73,4 @@ The easiest way to so is by using a jumper wire between those pins as seen bello
 
 [USB Rubber Ducky playlist by **Hak5**](https://www.youtube.com/playlist?list=PLW5y1tjAOzI0YaJslcjcI4zKI366tMBYk)
 
-[CircuitPython tutorial on the Raspberry Pi Pico by **DroneBot Workshop**](https://www.youtube.com/watch?v=07vG-_CcDG0)
+[CircuitPython tutorial on the Raspberry Pi Pico by **DroneBot Workshop**](https://www.youtube.com/watch?v=07vG-_CcDG0)

boot.py

@@ -0,0 +1,16 @@
+from board import *
+import digitalio
+import storage
+
+noStorageStatus = False
+noStoragePin = digitalio.DigitalInOut(GP15)
+noStoragePin.switch_to_input(pull=digitalio.Pull.UP)
+noStorageStatus = not noStoragePin.value
+
+if(noStorageStatus == True):
+    # don't show USB drive to host PC
+    storage.disable_usb_drive()
+    print("Disabling USB drive")
+else:
+    # normal boot
+    print("USB drive enabled")

duckyinpython.py

@@ -6,31 +6,46 @@ import time
 import digitalio
 from board import *
 
-duckyCommands = ["WINDOWS", "GUI", "APP", "MENU", "SHIFT", "ALT", "CONTROL", "CTRL", "DOWNARROW", "DOWN",
-"LEFTARROW", "LEFT", "RIGHTARROW", "RIGHT", "UPARROW", "UP", "BREAK", "PAUSE", "CAPSLOCK", "DELETE", "END",
-"ESC", "ESCAPE", "HOME", "INSERT", "NUMLOCK", "PAGEUP", "PAGEDOWN", "PRINTSCREEN", "SCROLLLOCK", "SPACE",
-"TAB", "ENTER", " a", " b", " c", " d", " e", " f", " g", " h", " i", " j", " k", " l", " m", " n", " o", " p", " q", " r", " s", " t",
-" u", " v", " w", " x", " y", " z", " A", " B", " C", " D", " E", " F", " G", " H", " I", " J", " K", " L", " M", " N", " O", " P",
-" Q", " R", " S", " T", " U", " V", " W", " X", " Y", " Z", "F1", "F2", "F3", "F4", "F5", "F6", "F7", "F8", "F9", "F10", "F11", "F12"]
-
-keycodeCommands = [Keycode.WINDOWS, Keycode.GUI, Keycode.APPLICATION, Keycode.APPLICATION, Keycode.SHIFT, Keycode.ALT, Keycode.CONTROL,
-Keycode.CONTROL, Keycode.DOWN_ARROW, Keycode.DOWN_ARROW ,Keycode.LEFT_ARROW, Keycode.LEFT_ARROW, Keycode.RIGHT_ARROW, Keycode.RIGHT_ARROW,
-Keycode.UP_ARROW, Keycode.UP_ARROW, Keycode.PAUSE, Keycode.PAUSE, Keycode.CAPS_LOCK, Keycode.DELETE, Keycode.END, Keycode.ESCAPE,
-Keycode.ESCAPE, Keycode.HOME, Keycode.INSERT, Keycode.KEYPAD_NUMLOCK, Keycode.PAGE_UP, Keycode.PAGE_DOWN, Keycode.PRINT_SCREEN,
-Keycode.SCROLL_LOCK, Keycode.SPACE, Keycode.TAB, Keycode.ENTER, Keycode.A, Keycode.B, Keycode.C, Keycode.D, Keycode.E, Keycode.F, Keycode.G,
-Keycode.H, Keycode.I, Keycode.J, Keycode.K, Keycode.L, Keycode.M, Keycode.N, Keycode.O, Keycode.P, Keycode.Q, Keycode.R, Keycode.S, Keycode.T,
-Keycode.U, Keycode.V, Keycode.W, Keycode.X, Keycode.Y, Keycode.Z, Keycode.A, Keycode.B, Keycode.C, Keycode.D, Keycode.E, Keycode.F,
-Keycode.G, Keycode.H, Keycode.I, Keycode.J, Keycode.K, Keycode.L, Keycode.M, Keycode.N, Keycode.O, Keycode.P,
-Keycode.Q, Keycode.R, Keycode.S, Keycode.T, Keycode.U, Keycode.V, Keycode.W, Keycode.X, Keycode.Y, Keycode.Z,
-Keycode.F1, Keycode.F2, Keycode.F3, Keycode.F4, Keycode.F5, Keycode.F6, Keycode.F7, Keycode.F8, Keycode.F9,
-Keycode.F10, Keycode.F11, Keycode.F12]
+duckyCommands = {
+    'WINDOWS': Keycode.WINDOWS, 'GUI': Keycode.GUI,
+    'APP': Keycode.APPLICATION, 'MENU': Keycode.APPLICATION, 'SHIFT': Keycode.SHIFT,
+    'ALT': Keycode.ALT, 'CONTROL': Keycode.CONTROL, 'CTRL': Keycode.CONTROL,
+    'DOWNARROW': Keycode.DOWN_ARROW, 'DOWN': Keycode.DOWN_ARROW, 'LEFTARROW': Keycode.LEFT_ARROW,
+    'LEFT': Keycode.LEFT_ARROW, 'RIGHTARROW': Keycode.RIGHT_ARROW, 'RIGHT': Keycode.RIGHT_ARROW,
+    'UPARROW': Keycode.UP_ARROW, 'UP': Keycode.UP_ARROW, 'BREAK': Keycode.PAUSE,
+    'PAUSE': Keycode.PAUSE, 'CAPSLOCK': Keycode.CAPS_LOCK, 'DELETE': Keycode.DELETE,
+    'END': Keycode.END, 'ESC': Keycode.ESCAPE, 'ESCAPE': Keycode.ESCAPE, 'HOME': Keycode.HOME,
+    'INSERT': Keycode.INSERT, 'NUMLOCK': Keycode.KEYPAD_NUMLOCK, 'PAGEUP': Keycode.PAGE_UP,
+    'PAGEDOWN': Keycode.PAGE_DOWN, 'PRINTSCREEN': Keycode.PRINT_SCREEN, 'ENTER': Keycode.ENTER,
+    'SCROLLLOCK': Keycode.SCROLL_LOCK, 'SPACE': Keycode.SPACE, 'TAB': Keycode.TAB,
+    'A': Keycode.A, 'B': Keycode.B, 'C': Keycode.C, 'D': Keycode.D, 'E': Keycode.E,
+    'F': Keycode.F, 'G': Keycode.G, 'H': Keycode.H, 'I': Keycode.I, 'J': Keycode.J,
+    'K': Keycode.K, 'L': Keycode.L, 'M': Keycode.M, 'N': Keycode.N, 'O': Keycode.O,
+    'P': Keycode.P, 'Q': Keycode.Q, 'R': Keycode.R, 'S': Keycode.S, 'T': Keycode.T,
+    'U': Keycode.U, 'V': Keycode.V, 'W': Keycode.W, 'X': Keycode.X, 'Y': Keycode.Y,
+    'Z': Keycode.Z, 'F1': Keycode.F1, 'F2': Keycode.F2, 'F3': Keycode.F3,
+    'F4': Keycode.F4, 'F5': Keycode.F5, 'F6': Keycode.F6, 'F7': Keycode.F7,
+    'F8': Keycode.F8, 'F9': Keycode.F9, 'F10': Keycode.F10, 'F11': Keycode.F11,
+    'F12': Keycode.F12,
+}
 
 def convertLine(line):
     newline = []
     print(line)
-    for j in range(len(keycodeCommands)):
-		    if line.find(duckyCommands[j]) != -1:
-		    	newline.append(keycodeCommands[j])
+    # loop on each key - the filter removes empty values
+    for key in filter(None, line.split(" ")):
+        key = key.upper()
+        # find the keycode for the command in the list
+        command_keycode = duckyCommands.get(key, None)
+        if command_keycode is not None:
+            # if it exists in the list, use it
+            newline.append(command_keycode)
+        elif hasattr(Keycode, key):
+            # if it's in the Keycode module, use it (allows any valid keycode)
+            newline.append(getattr(Keycode, key))
+        else:
+            # if it's not a known key name, show the error for diagnosis
+            print(f"Unknown key: <{key}>")
     print(newline)
     return newline