1.0.1

README.md

@@ -199,16 +199,13 @@ I grouped most of the variables you may want to modify in this section of `usb_c
 //
 // You can see here for inspiration: https://the-sz.com/products/usbid/
 //
-// Example:
-//             0x0951 0x16D5    VENDORID_STR: Kingston   PRODUCTID_STR: DataTraveler
-//
-#define USB_VENDORID       0x0951
-#define USB_PRODUCTID      0x16D5
-#define USB_DESCRIPTOR     "DataTraveler"
-#define USB_MANUF          "Kingston"
+#define USB_VENDORID       0xCAFE
+#define USB_PRODUCTID      0x1337
+#define USB_DESCRIPTOR     "DataStore"
+#define USB_MANUF          "USB Acme"
 #define USB_SERIAL         "123456789A"
-#define USB_VENDORID_STR   "Kingston"        // Up to 8 chars
-#define USB_PRODUCTID_STR  "DataTraveler"    // Up to 16 chars
+#define USB_VENDORID_STR   "Acme"            // Up to 8 chars
+#define USB_PRODUCTID_STR  "DataStore"       // Up to 16 chars
 #define USB_VERSION_STR    "1.0"             // Up to 4 chars
 ```
 

src/usb_config.h

@@ -2,7 +2,7 @@
 #define USB_CONFIG_H
 
 // Project version
-#define VERSION "USBvalve - 1.0.0"
+#define VERSION "USBvalve - 1.0.1"
 
 // USB anti-detection settings
 //
@@ -12,16 +12,13 @@
 //
 // You can see here for inspiration: https://the-sz.com/products/usbid/
 //
-// Example:
-//             0x0951 0x16D5    VENDORID_STR: Kingston   PRODUCTID_STR: DataTraveler
-//
-#define USB_VENDORID       0x0951
-#define USB_PRODUCTID      0x16D5
-#define USB_DESCRIPTOR     "DataTraveler"
-#define USB_MANUF          "Kingston"
+#define USB_VENDORID       0xCAFE
+#define USB_PRODUCTID      0x1337
+#define USB_DESCRIPTOR     "DataStore"
+#define USB_MANUF          "USB Acme"
 #define USB_SERIAL         "123456789A"
-#define USB_VENDORID_STR   "Kingston"        // Up to 8 chars
-#define USB_PRODUCTID_STR  "DataTraveler"    // Up to 16 chars
+#define USB_VENDORID_STR   "Acme"            // Up to 8 chars
+#define USB_PRODUCTID_STR  "DataStore"       // Up to 16 chars
 #define USB_VERSION_STR    "1.0"             // Up to 4 chars
 
 // Disk configuration

src/usb_device.c

@@ -75,7 +75,7 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset,
 
     // Return data from ramdisk, or zeros for blocks beyond it.
     // The disk reports FAKE_DISK_BLOCK_NUM sectors but only
-    // DISK_BLOCK_NUM exist in RAM — the rest must read as empty.
+    // DISK_BLOCK_NUM exist in RAM, the rest must read as empty.
     if (lba < DISK_BLOCK_NUM) {
         memcpy(buffer, msc_disk[lba], bufsize);
     } else {