bump to release 0.18.1

README.md

@@ -190,7 +190,7 @@ I grouped most of the variables you may want to modify in this section ([see Doc
 Obviously you can also build your own firmware. To build the *standard* one I used:
 
 - Arduino IDE `2.3.2`
-- `Adafruit TinyUSB Library` version `3.1.4`, `Pico-PIO-USB` version `0.5.2`, Board `Raspberry Pi RP2040 (3.8.0)` setting Tools=>CPU Speed at `120MHz` and Tools=>USB Stack to `Adafruit TinyUSB`
+- `Adafruit TinyUSB Library` version `3.1.4`, `Pico-PIO-USB` version `0.5.2`, Board `Raspberry Pi RP2040 (3.8.1)` setting Tools=>CPU Speed at `120MHz` and Tools=>USB Stack to `Adafruit TinyUSB`
 - `Adafruit_SSD1306` OLED library version `2.5.10`
 
 If you want to re-create a new fake filesystem, you may want to have a look to the `utils` folder, where I placed some utilities to build a new one.
@@ -214,6 +214,12 @@ If you have ideas or improvements in your mind, I encourage you to open an issue
 
 If you have question or need support you can open an `Issue` here or reach me out on Twitter/X [@red5heep](https://twitter.com/red5heep)
 
+### Community versions
+
+The Community created some forks implementing support for other boards, or other modifications. **Thank you to everyone** who contributed to the development of **USBvalve**.
+Here below an unofficial/incomplete/unsupported list:
+- [USBvalve-tbfa-Mod](https://github.com/TryBreakFixAgain/USBvalve-tbfa-Mod)
+
 ## SAFETY WARNING
 
 > [!WARNING]

USBvalve/USBvalve.ino

@@ -21,7 +21,7 @@
 
 // Uncomment the following to compile for the RP2040 based TFT round display
 // https://www.raspberrypi.com/news/how-to-build-your-own-raspberry-pi-watch/
-#define PIWATCH
+//#define PIWATCH
 
 #include <pio_usb.h>
 #include "Adafruit_TinyUSB.h"
@@ -116,7 +116,7 @@ bool activeState = false;
 //
 // USBvalve globals
 //
-#define VERSION "USBvalve - 0.18.0"
+#define VERSION "USBvalve - 0.18.1"
 boolean readme = false;
 boolean autorun = false;
 boolean written = false;
@@ -423,6 +423,9 @@ void printout(const char *str)
   } else {
     gfx->print(str);
   }
+
+  // Output on serial device
+  SerialTinyUSB.println(str);
 }
 #else
 
@@ -457,6 +460,9 @@ void printout(const char *str)
   checkAndScroll();
   display.print(str);
   display.display();
+
+  // Output on serial device
+  SerialTinyUSB.println(str);
 }
 #endif