Doc updates (#104)

* Update instructions to include copying boot.py

* Clean up instructions

* Fix formatting

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,34 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+**Describe the bug**
+A clear and concise description of what the bug is.
+
+**To Reproduce**
+Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error
+
+**Expected behavior**
+A clear and concise description of what you expected to happen.
+
+**Screenshots**
+If applicable, add screenshots to help explain your problem.
+
+**Debug info**
+If possible, include debug serial data.
+On Windows, use PuTTY, connect to the debug serial port (commonly COM3, but could vary)
+
+On Linux, use minicom (minicom -b 115200 -o -D /dev/ttyACM0, where ttyACM0 corresponds to your device) 
+
+
+**Additional context**
+Add any other context about the problem here.

README.md

@@ -20,21 +20,30 @@
 
 Install and have your USB Rubber Ducky working in less than 5 minutes.
 
-1. Download [CircuitPython for the Raspberry Pi Pico](https://circuitpython.org/board/raspberry_pi_pico/). *Updated to 7.0.0
+1. Clone the repo to get a local copy of the files. `git clone https://github.com/dbisu/pico-ducky.git`
 
-2. Plug the device into a USB port. It will show up as a removable media device named `RPI-RP2`.
+2. Download [CircuitPython for the Raspberry Pi Pico](https://circuitpython.org/board/raspberry_pi_pico/). *Updated to 7.0.0
 
-3. Copy the downloaded `.uf2` file to the root of the Pico (`RPI-RP2`). The device will reboot and after a second or so, it will reconnect as `CIRCUITPY`.
+3. Plug the device into a USB port while holding the boot button. It will show up as a removable media device named `RPI-RP2`.
 
-4. Download `adafruit-circuitpython-bundle-7.x-mpy-YYYYMMDD.zip` [here](https://github.com/adafruit/Adafruit_CircuitPython_Bundle/releases/latest) and extract it outside the device.
+4. Copy the downloaded `.uf2` file to the root of the Pico (`RPI-RP2`). The device will reboot and after a second or so, it will reconnect as `CIRCUITPY`.
 
-5. Navigate to `lib` in the recently extracted folder and copy `adafruit_hid` to the `lib` folder in your Raspberry Pi Pico.
+5. Download `adafruit-circuitpython-bundle-7.x-mpy-YYYYMMDD.zip` [here](https://github.com/adafruit/Adafruit_CircuitPython_Bundle/releases/latest) and extract it outside the device.
 
-6. Click [here](https://raw.githubusercontent.com/dbisu/pico-ducky/main/duckyinpython.py), press CTRL + S and save the file as `code.py` in the root of the Raspberry Pi Pico, overwriting the previous file.
+6. Navigate to `lib` in the recently extracted folder and copy `adafruit_hid` to the `lib` folder on your Raspberry Pi Pico.
 
-7. Find a script [here](https://github.com/hak5darren/USB-Rubber-Ducky/wiki/Payloads) or [create your own one using Ducky Script](https://github.com/hak5darren/USB-Rubber-Ducky/wiki/Duckyscript) and save it as `payload.dd` in the Pico.
+7. Copy `adafruit_debouncer.mpy` and `adafruit_ticks.mpy` to the `lib` folder on your Raspberry Pi Pico.
 
-8. Be careful, if your device isn't in [setup mode](#setup-mode), the device will reboot and after half a second, the script will run.
+8. Copy `asyncio` to the `lib` folder on your Pico.
+
+9. Copy `boot.py` from your clone to the root of your Pico.
+
+10. Copy `duckyinpython.py` as `code.py` in the root of the Raspberry Pi Pico, overwriting the previous file.  
+     Linux: `cp duckyinpython.py </path/to/pico/code.py`
+
+11. Find a script [here](https://github.com/hak5darren/USB-Rubber-Ducky/wiki/Payloads) or [create your own one using Ducky Script](https://github.com/hak5darren/USB-Rubber-Ducky/wiki/Duckyscript) and save it as `payload.dd` in the Pico.
+
+12. Be careful, if your device isn't in [setup mode](#setup-mode), the device will reboot and after half a second, the script will run.
 
 ### Setup mode
 
@@ -46,11 +55,10 @@ The easiest way to so is by using a jumper wire between those pins as seen bello
 ### USB enable/disable mode
 
 If you need the pico-ducky to not show up as a USB mass storage device for stealth, follow these instructions.  
-Enter setup mode.  
-Copy boot.py to the root of the pico-ducky.  
+Enter setup mode.    
 Copy your payload script to the pico-ducky.  
 Disconnect the pico from your host PC.
-Connect a jumper wire between pin 18 and pin 20.
+Connect a jumper wire between pin 18 (`GND`) and pin 20 (`GPIO15`).  
 This will prevent the pico-ducky from showing up as a USB drive when plugged into the target computer.  
 Remove the jumper and reconnect to your PC to reprogram.
 The default mode is USB mass storage enabled.   
@@ -86,7 +94,6 @@ For a language `LANG`, copy the following files from the zip's `lib` folder to t
 **DO NOT** change the names or extensions of the files. Just pick the right ones.  
 Replace `LANG` with the letters for your language of choice.
 
-- `keyboard_layout.py`
 - `keyboard_layout_win_LANG.py`
 - `keycode_win_LANG.py`
 
@@ -112,8 +119,33 @@ from keyboard_layout_win_LANG import KeyboardLayout
 from keycode_win_LANG import Keycode
 ```
 
+##### Example:  Set to German Keyboard (WIN_DE)
+
+```py
+from keyboard_layout_win_de import KeyboardLayout
+from keycode_win_de import Keycode
+```
+
+Copy the files keyboard_layout_win_de.mpy and keycode_win_de.mpy to the /lib folder on the Pico board
+```
+adafruit_hid/
+keyboard_layout_win_de.mpy
+keycode_win_de.mpy
+```
+
+
+
 ## Useful links and resources
 
+### How to recover your Pico if it becomes corrupted or doesn't boot.
+
+[Reset Instructions](RESET.md)
+
+### Installation Tool
+
+[raspberrypi5621](https://github.com/raspberrypi5621) Created a tool to convert a blank RPi Pico to a ducky.  
+You can find the tool [here](https://github.com/raspberrypi5621/pyducky)
+
 ### Docs
 
 [CircuitPython](https://circuitpython.readthedocs.io/en/6.3.x/README.html)

RESET.md

@@ -0,0 +1,7 @@
+# Instructions on how to reset a Raspberry Pi Pico
+Follow these instructions if your Pico ends up in an odd state
+
+1. Download the reset firmware from [flash_nuke.uf2](https://datasheets.raspberrypi.com/soft/flash_nuke.uf2)
+2. While holding the BOOTSEL button on the Pico, plug in the USB cable to your computer.
+3. When the RPI-RP2 drive shows up on your computer, copy the flash_nuke.uf2 file to the Pico
+4. After the device reboots, follow the Install instructions [here](https://github.com/dbisu/pico-ducky/blob/main/README.md)

duckyinpython.py

@@ -1,3 +1,7 @@
+# License : GPLv2.0
+# copyright (c) 2021  Dave Bailey
+# Author: Dave Bailey (dbisu, @daveisu)
+
 import usb_hid
 from adafruit_hid.keyboard import Keyboard
 
@@ -10,9 +14,33 @@ from adafruit_hid.keycode import Keycode
 #from keyboard_layout_win_LANG import KeyboardLayout
 #from keycode_win_LANG import Keycode
 
+import supervisor
+
 import time
 import digitalio
+from digitalio import DigitalInOut, Pull
+from adafruit_debouncer import Debouncer
 from board import *
+import pwmio
+import asyncio
+
+led = pwmio.PWMOut(LED, frequency=5000, duty_cycle=0)
+
+def led_pwm_up(led):
+    for i in range(100):
+        # PWM LED up and down
+        if i < 50:
+            led.duty_cycle = int(i * 2 * 65535 / 100)  # Up
+        time.sleep(0.01)
+def led_pwm_down(led):
+    for i in range(100):
+        # PWM LED up and down
+        if i >= 50:
+            led.duty_cycle = 65535 - int((i - 50) * 2 * 65535 / 100)  # Down
+        time.sleep(0.01)
+
+# led = digitalio.DigitalInOut(LED)
+# led.direction = digitalio.Direction.OUTPUT
 
 duckyCommands = {
     'WINDOWS': Keycode.WINDOWS, 'GUI': Keycode.GUI,
@@ -26,6 +54,7 @@ duckyCommands = {
     'INSERT': Keycode.INSERT, 'NUMLOCK': Keycode.KEYPAD_NUMLOCK, 'PAGEUP': Keycode.PAGE_UP,
     'PAGEDOWN': Keycode.PAGE_DOWN, 'PRINTSCREEN': Keycode.PRINT_SCREEN, 'ENTER': Keycode.ENTER,
     'SCROLLLOCK': Keycode.SCROLL_LOCK, 'SPACE': Keycode.SPACE, 'TAB': Keycode.TAB,
+    'BACKSPACE': Keycode.BACKSPACE,
     'A': Keycode.A, 'B': Keycode.B, 'C': Keycode.C, 'D': Keycode.D, 'E': Keycode.E,
     'F': Keycode.F, 'G': Keycode.G, 'H': Keycode.H, 'I': Keycode.I, 'J': Keycode.J,
     'K': Keycode.K, 'L': Keycode.L, 'M': Keycode.M, 'N': Keycode.N, 'O': Keycode.O,
@@ -35,11 +64,11 @@ duckyCommands = {
     'F4': Keycode.F4, 'F5': Keycode.F5, 'F6': Keycode.F6, 'F7': Keycode.F7,
     'F8': Keycode.F8, 'F9': Keycode.F9, 'F10': Keycode.F10, 'F11': Keycode.F11,
     'F12': Keycode.F12,
-}
 
+}
 def convertLine(line):
     newline = []
-    print(line)
+    # print(line)
     # loop on each key - the filter removes empty values
     for key in filter(None, line.split(" ")):
         key = key.upper()
@@ -54,7 +83,7 @@ def convertLine(line):
         else:
             # if it's not a known key name, show the error for diagnosis
             print(f"Unknown key: <{key}>")
-    print(newline)
+    # print(newline)
     return newline
 
 def runScriptLine(line):
@@ -66,6 +95,7 @@ def sendString(line):
     layout.write(line)
 
 def parseLine(line):
+    global defaultDelay
     if(line[0:3] == "REM"):
         # ignore ducky script comments
         pass
@@ -73,10 +103,19 @@ def parseLine(line):
         time.sleep(float(line[6:])/1000)
     elif(line[0:6] == "STRING"):
         sendString(line[7:])
+    elif(line[0:5] == "PRINT"):
+        print("[SCRIPT]: " + line[6:])
+    elif(line[0:6] == "IMPORT"):
+        runScript(line[7:])
     elif(line[0:13] == "DEFAULT_DELAY"):
         defaultDelay = int(line[14:]) * 10
     elif(line[0:12] == "DEFAULTDELAY"):
         defaultDelay = int(line[13:]) * 10
+    elif(line[0:3] == "LED"):
+        if(led.value == True):
+            led.value = False
+        else:
+            led.value = True
     else:
         newScriptLine = convertLine(line)
         runScriptLine(newScriptLine)
@@ -84,35 +123,171 @@ def parseLine(line):
 kbd = Keyboard(usb_hid.devices)
 layout = KeyboardLayout(kbd)
 
+# turn off automatically reloading when files are written to the pico
+supervisor.disable_autoreload()
+
 # sleep at the start to allow the device to be recognized by the host computer
 time.sleep(.5)
 
-# check GP0 for setup mode
-# see setup mode for instructions
-progStatus = False
-progStatusPin = digitalio.DigitalInOut(GP0)
-progStatusPin.switch_to_input(pull=digitalio.Pull.UP)
-progStatus = not progStatusPin.value
+led_pwm_up(led)
+
+#init button
+button1_pin = DigitalInOut(GP22) # defaults to input
+button1_pin.pull = Pull.UP      # turn on internal pull-up resistor
+button1 =  Debouncer(button1_pin)
+
+#init payload selection switch
+payload1Pin = digitalio.DigitalInOut(GP4)
+payload1Pin.switch_to_input(pull=digitalio.Pull.UP)
+payload2Pin = digitalio.DigitalInOut(GP5)
+payload2Pin.switch_to_input(pull=digitalio.Pull.UP)
+payload3Pin = digitalio.DigitalInOut(GP10)
+payload3Pin.switch_to_input(pull=digitalio.Pull.UP)
+payload4Pin = digitalio.DigitalInOut(GP11)
+payload4Pin.switch_to_input(pull=digitalio.Pull.UP)
+
+def getProgrammingStatus():
+    # check GP0 for setup mode
+    # see setup mode for instructions
+    progStatusPin = digitalio.DigitalInOut(GP0)
+    progStatusPin.switch_to_input(pull=digitalio.Pull.UP)
+    progStatus = not progStatusPin.value
+    return(progStatus)
+
+
 defaultDelay = 0
+
+def runScript(file):
+    global defaultDelay
+
+    duckyScriptPath = file
+    try:
+        f = open(duckyScriptPath,"r",encoding='utf-8')
+        previousLine = ""
+        for line in f:
+            line = line.rstrip()
+            if(line[0:6] == "REPEAT"):
+                for i in range(int(line[7:])):
+                    #repeat the last command
+                    parseLine(previousLine)
+                    time.sleep(float(defaultDelay)/1000)
+            else:
+                parseLine(line)
+                previousLine = line
+            time.sleep(float(defaultDelay)/1000)
+    except OSError as e:
+        print("Unable to open file ", file)
+
+def selectPayload():
+    global payload1Pin, payload2Pin, payload3Pin, payload4Pin
+    payload = "payload.dd"
+    # check switch status
+    # payload1 = GPIO4 to GND
+    # payload2 = GPIO5 to GND
+    # payload3 = GPIO10 to GND
+    # payload4 = GPIO11 to GND
+    payload1State = not payload1Pin.value
+    payload2State = not payload2Pin.value
+    payload3State = not payload3Pin.value
+    payload4State = not payload4Pin.value
+
+
+    if(payload1State == True):
+        payload = "payload.dd"
+
+    elif(payload2State == True):
+        payload = "payload2.dd"
+
+    elif(payload3State == True):
+        payload = "payload3.dd"
+
+    elif(payload4State == True):
+        payload = "payload4.dd"
+
+    else:
+        # if all pins are high, then no switch is present
+        # default to payload1
+        payload = "payload.dd"
+
+
+    return payload
+
+
+async def blink_pico_led(led):
+    print("starting blink_pico_led")
+    led_state = False
+    while True:
+        if led_state:
+            #led_pwm_up(led)
+            print("led up")
+            for i in range(100):
+                # PWM LED up and down
+                if i < 50:
+                    led.duty_cycle = int(i * 2 * 65535 / 100)  # Up
+                await asyncio.sleep(0.01)
+            led_state = False
+        else:
+            #led_pwm_down(led)
+            print("led down")
+            for i in range(100):
+                # PWM LED up and down
+                if i >= 50:
+                    led.duty_cycle = 65535 - int((i - 50) * 2 * 65535 / 100)  # Down
+                await asyncio.sleep(0.01)
+            led_state = True
+        await asyncio.sleep(0)
+
+async def monitor_buttons(button1):
+    global inBlinkeyMode, inMenu, enableRandomBeep, enableSirenMode,pixel
+    print("starting monitor_buttons")
+    button1Down = False
+    while True:
+        button1.update()
+
+        button1Pushed = button1.fell
+        button1Released = button1.rose
+        button1Held = not button1.value
+
+        if(button1Pushed):
+            print("Button 1 pushed")
+            button1Down = True
+        if(button1Released):
+            print("Button 1 released")
+            if(button1Down):
+                print("push and released")
+
+        if(button1Released):
+            if(button1Down):
+                # Run selected payload
+                payload = selectPayload()
+                print("Running ", payload)
+                runScript(payload)
+                print("Done")
+            button1Down = False
+
+        await asyncio.sleep(0)
+
+
+
+progStatus = False
+progStatus = getProgrammingStatus()
+
 if(progStatus == False):
     # not in setup mode, inject the payload
-    duckyScriptPath = "payload.dd"
-    f = open(duckyScriptPath,"r",encoding='utf-8')
-    print("Running payload.dd")
-    previousLine = ""
-    duckyScript = f.readlines()
-    for line in duckyScript:
-        line = line.rstrip()
-        if(line[0:6] == "REPEAT"):
-            for i in range(int(line[7:])):
-                #repeat the last command
-                parseLine(previousLine)
-                time.sleep(float(defaultDelay)/1000)
-        else:
-            parseLine(line)
-            previousLine = line
-        time.sleep(float(defaultDelay)/1000)
+    payload = selectPayload()
+    print("Running ", payload)
+    runScript(payload)
 
     print("Done")
 else:
     print("Update your payload")
+
+led_state = False
+
+async def main_loop():
+    global led,button1
+    pico_led_task = asyncio.create_task(blink_pico_led(led))
+    button_task = asyncio.create_task(monitor_buttons(button1))
+    await asyncio.gather(pico_led_task, button_task)
+
+asyncio.run(main_loop())